●  Canadian Haircare Brand ●  Real Routines, Reviews & Results ●  Secure Checkout ●  Flat USD $15 Shipping ●  Canadian Haircare Brand ●  Real Routines, Reviews & Results ●  Secure Checkout ●  Flat USD $15 Shipping
Damage + breakage support

Choose the Right Level of Care for Damaged Hair

Bleaching, colour, chemical services and repeated heat can leave hair feeling rougher, weaker or harder to manage. Begin with what caused the change. Then choose prevention, weekly home care or a professionally managed system.

The quiz recommends from Celine Claire products only. Professional products remain clearly separated from home care.

Long dark hair with strong believable texture and honest styling history
Recognize the stressor

What changed before the hair changed?

Repeated blow-drying or hot tools

Hair feels rougher, ends catch during combing or shine disappears after styling. Build prevention into the next session with Heat Shield, then use Bonding Rosemary Oil in a small amount where leave-in repair support and polish are needed.

Bleaching, colouring or another chemical service

Hair feels more fragile or prone to breakage after processing. TecPlex No.3 is the weekly home-maintenance route. TecPlex No.1 and No.2 belong inside an approved professional service, not an unsupervised home chemical process.

Dryness, tangles and roughness without a recent service

The immediate need may be richer wash-day conditioning rather than a professional system. Argan Oil Hair Mask provides a 2–3 minute rinse-out treatment, followed by conditioner.

A desire for a smoother, straighter-looking finish

Hair Botox and Nano Keratin Protein are advanced smoothing options. Their goal, method and safety requirements differ from bond care. Start with a professional assessment and the exact product protocol.

Sudden or severe change

If breakage, shedding, scalp discomfort or texture change is sudden, severe or unexplained, pause the sales path and seek suitable professional advice. This page supports cosmetic product selection; it does not diagnose a condition.

Care happens at different moments

Before, between and during services.

Before styling

Heat Shield Hair Spray is the dedicated preparation step before blow-drying, straightening or curling. It supports protection, slip, frizz control and shine, but does not make unlimited temperature or repeated passes harmless.

Between wash days

Bonding Rosemary Oil is a concentrated leave-in used in a small amount on wet, damp or dry hair. It supports repair-focused care, heat protection, detangling, frizz control and shine without becoming a scalp oil or rinse-out mask.

Once a week at home

TecPlex No.3 is a rinse-out pre-shampoo treatment. Apply it to unwashed, towel-dried hair, leave for at least 10 minutes, rinse, shampoo and condition.

During a professional service

TecPlex No.1 and No.2 are professional steps used only within a compatible, approved protocol. They are not included in TecPlex No.3 or Bonding Rosemary Oil.

The home-care routes

Three home products, three separate jobs.

Sectioning hair with a clip before controlled blow-drying
Route A · Protect before heat

Protect before heat

Heat Shield Hair Spray belongs before the tool. Shake the bottle, mist evenly through damp or dry mid-lengths and ends, then distribute through sections. Before direct-contact tools, allow visibly wet mist to dry. Use the lowest effective temperature and limit repeated passes.

Use it when the routine includes a blow-dryer, flat iron or curling tool. It is not a finishing hairspray, a rinse-out treatment or a cure for existing damage.

Smoothing a small amount of bonding oil through lengths and ends
Route B · Leave-in bonding care

Leave in a small amount of bonding care

Bonding Rosemary Oil is the visible name for the product packaged as Tec Plex 7 Bonding Oil. Dispense a small, controlled amount, rub it between the palms and work through wet, damp or dry hair and ends. Style as desired. Add more only if the hair still needs it.

Before heat, apply a small amount to wet or damp lengths and ends. After styling, use very little on dry hair for flyaways and shine. Between wash days, apply sparingly to dry lengths and ends. Do not apply it as an overnight scalp treatment, mix it into shampoo or rinse it out as a mask.

Applying a rich cream treatment through damp towel-dried hair before shampoo
Route C · Weekly pre-shampoo bond care

Use weekly pre-shampoo bond care

TecPlex No.3 Bond Perfector is the personal-use maintenance step. It is a 100 ml cream treatment, not an oil and not a conditioner.

  1. Begin with unwashed hair.
  2. Wet the hair and towel-dry until damp rather than dripping.
  3. Apply a generous, even amount through the appropriate areas and ends.
  4. Leave for at least 10 minutes.
  5. Rinse thoroughly.
  6. Shampoo.
  7. Condition.
  8. Style with suitable protection.
  9. Repeat once weekly unless the current bottle or an approved professional protocol directs otherwise.
Compare the TecPlex family

No.3 and No.7 are not interchangeable.

TecPlex No.3 Bond Perfector

Main roleWeekly home maintenance for damaged and compromised hair
Format100 ml cream treatment
TimingBefore shampoo · at least 10 minutes · rinse
Intended userRetail customer

TecPlex No.7 Bonding Rosemary Oil

Main roleLeave-in repair, heat, frizz and shine support
Format90 ml concentrated oil
TimingWet, damp or dry hair · no rinse
Intended userRetail customer or stylist finish
Professional use only

TecPlex No.1 Bond Reconstructor + No.2 Bond Stabilizer

Main roleNo.1 is the approved in-service professional step; No.2 is the approved post-service step for verified timing
FormatThe professional kit contains one 100 ml No.1 and two 100 ml No.2 creams — 300 ml total. It does not include No.3 or No.7.
Intended userTrained salon professional working within the current technical protocol
Exact compatibility, mixing ratios, processing times, temperature and safety requirements come from the current Celine Claire technical manual — not from this page.
Combing a rich mask through damp mid-lengths on wash day
When a mask is the better starting point

Rough and tangled does not always require a bond system.

If the immediate goal is softness, detangling and a richer wash-day treatment, choose Argan Oil Hair Mask. Apply it after shampoo to freshly washed, towel-dried hair, focus on dry or stressed mid-lengths and ends, leave for 2–3 minutes, rinse thoroughly, then follow with a Celine Claire Conditioner.

The mask is not TecPlex No.3 — it does not use the No.3 pre-shampoo sequence, and its timing is 2–3 minutes, not a broad range.

Visit Dry or Dull-Looking Hair

Professional bond care

TecPlex No.1 and No.2 belong in the salon workflow.

The TecPlex Professional Bond Repair System is designed for trained salon professionals working with compatible colour, lightening or chemical-service protocols approved by the current Celine Claire technical manual.

No.1 Bond Reconstructor is the measured in-service step. No.2 Bond Stabilizer follows after the approved chemical sequence is rinsed.

Professional notice Professional use only. This page is not a mixing or processing manual. Follow the current Celine Claire technical manual, the chemical product manufacturer's instructions and all required safety procedures.
A trained stylist sectioning a client's hair in a salon
Bond care or smoothing service?

Choose by the intended result.

TecPlex No.3

Weekly at-home bond-care maintenance after damage or a compatible service. A controlled home pre-shampoo treatment — not a leave-in oil and not the professional No.1/No.2 service.

TecPlex Professional

Bond-care support during approved chemical services. Trained professional only — not a retail home treatment.

Hair Botox

A separate advanced smoothing treatment for a smoother, sleeker, shinier-looking finish and improved manageability. Its process includes sectioned application, processing, complete blow-drying and controlled flat-ironing. Professional application is recommended until the final package protocol is confirmed — no universal temperature, pass count or same-day rinse method is published here.

Nano Keratin Protein

A 1000 ml professional smoothing treatment designed to reduce visible frizz, curl and excess-looking volume while supporting a softer, straighter-looking finish. It is not a wash-day protein mask, and no borrowed temperatures or timings appear here.

Argan Oil Hair Mask

Richer rinse-out conditioning, softness and manageability on home or salon wash days — not a flat-iron smoothing or bond-repair system.

Advanced smoothing

Hair Botox

Professional use only

Nano Keratin Protein

Do not mix, layer or schedule Hair Botox and Nano Keratin Protein back-to-back — their instructions are separate.

A practical retail routine

Build care around the stressor.

Weekly treatment day

  1. Use TecPlex No.3 on unwashed, towel-dried hair.
  2. Leave for at least 10 minutes.
  3. Rinse thoroughly.
  4. Shampoo and condition.
  5. Style with Heat Shield if heat will be used.
  6. Use a small amount of Bonding Rosemary Oil only if the hair needs leave-in support or finishing polish.

Not every routine needs both Heat Shield and Bonding Rosemary Oil — use the simplest effective route and keep combined amounts controlled.

Everyday heat-styling day

  1. Cleanse and condition according to the selected wash routine.
  2. Mist Heat Shield evenly through sections before the tool.
  3. Use controlled heat and avoid repeated passes.
  4. After styling, use a very small amount of Bonding Rosemary Oil only where the surface or ends need it.

Moisture-focused treatment day

  1. Shampoo and rinse.
  2. Towel-dry.
  3. Apply Argan Oil Hair Mask for 2–3 minutes.
  4. Rinse thoroughly.
  5. Follow with conditioner.
  6. Style gently and add heat protection if needed.
Shop by level of care

The products on this page.

Proof and education

Proof must match the product and the process.

How the mask is applied

An application tutorial, not a before-and-after. Bond and repair claims still need the verified proof described above.

Product demonstrationIntense Hair Mask applicationArgan Oil Hair Mask

Verified reviews from the exact products on this page will appear here as customers and professionals share them.

Every review stays attached to its exact product. Professional results are shown only with the actual service context and permission.

Customer experiences

As a Salon owner have been in business for over 33 years in Canada and have experienced many high quality products from well known hair products industry, but Celine Claire hair Mask and all other products are so rich in Keratin Protein and make hair silky without loosing hair volume. I recommend Celine Clair products, specially for damage hair, to my Clients.

Farah Aghajani

Recently my hair stylist used the Celine Claire hair mask on my hair, amazing result. My hair looks shiny, healthy, easy to style and keep the style till the next wash. I LOVE THE PRODUCT. I ordered from instagram page and I received the product on time.

Maria Rezazadeh
Questions

Damaged hair and bond-care questions.

Which Celine Claire product should I choose for damaged hair?
Choose by the cause and product role. Heat Shield helps prepare hair before hot tools. Bonding Rosemary Oil is a small leave-in step. TecPlex No.3 is weekly home pre-shampoo bond care. Argan Oil Hair Mask is richer wash-day conditioning. TecPlex No.1 and No.2 are professional-only service products.
Is dry hair the same as damaged hair?
No. Dryness, roughness and damage can overlap, but they are not identical. If softness and tangles are the main issues, the dry-hair or mask route may be enough. If bleach, colour, chemical services or repeated heat caused a clear change, compare the damage pathways.
What is TecPlex No.3?
TecPlex No.3 Bond Perfector is the 100 ml weekly home-maintenance step in the TecPlex bond-care system. It is a rinse-out pre-shampoo treatment, not an oil or conditioner.
How do I use TecPlex No.3?
Apply it generously to unwashed, towel-dried hair, leave it for at least 10 minutes, rinse thoroughly, then shampoo and condition. Use once weekly unless the current label or approved professional protocol directs otherwise.
Can I leave TecPlex No.3 in overnight?
Do not use an overnight method. The current bottle controls publication: leave it for at least 10 minutes, rinse, then shampoo and condition.
Is TecPlex No.3 the same as Bonding Rosemary Oil?
No. No.3 is a weekly cream treatment used before shampoo and rinsed out. Bonding Rosemary Oil, also packaged as Tec Plex 7, is a concentrated leave-in oil used in a small amount on wet, damp or dry hair.
Can Bonding Rosemary Oil be applied to the scalp overnight?
No. The current directions place it through the hair and ends as a leave-in product. Its rosemary ingredient story does not convert into an overnight scalp-oiling method.
Does Bonding Rosemary Oil protect against heat?
Current Celine Claire and exact-product retailer positioning supports heat protection. No exact temperature appears here without current test documentation.
Do I need Heat Shield if I use Bonding Rosemary Oil?
They have overlapping heat-related positioning but different product formats and roles. Heat Shield is the dedicated preparation spray. Bonding Rosemary Oil adds leave-in repair-focused care and polish. Use only the steps needed, and keep combined amounts controlled.
Does heat protectant make hot tools harmless?
No. Use the lowest effective temperature, limit repeated passes and adapt the method to the condition of the hair.
Is Argan Oil Hair Mask a bond-repair treatment?
It is a rich rinse-out conditioning treatment for softness, manageability and stressed-feeling hair. Follow its 2–3 minute method and then condition. It does not use TecPlex No.3 instructions.
What is included in the TecPlex Professional kit?
The kit contains one 100 ml No.1 Bond Reconstructor and two 100 ml No.2 Bond Stabilizers, 300 ml total. It does not include No.3 or No.7.
Can I use TecPlex No.1 and No.2 at home?
No. The kit is intended for trained salon professionals working within compatible services authorized by the current technical manual. Its product page is not a replacement for training.
Is Hair Botox the same as bond repair?
No. Hair Botox is a separate advanced smoothing process designed for a sleeker, smoother and shinier-looking finish. Its protocol includes processing and controlled heat.
Is Nano Keratin Protein a mask?
No. It is a 1000 ml professional smoothing treatment intended to reduce visible frizz, curl and excess-looking volume. It requires the exact protocol and professional handling.
Can Hair Botox and Nano Keratin Protein be used together?
Do not mix, layer or schedule them back-to-back without an approved Celine Claire protocol and professional assessment. Their instructions are separate.
Can damaged hair be permanently repaired?
No permanent reversal of every form of damage should be expected. Celine Claire products may support strength, breakage reduction, softness, smoothness, manageability and protection according to their established product roles. Results vary with starting condition and routine.
What if my hair is suddenly breaking or shedding?
Pause chemical and high-heat experimentation and seek appropriate professional advice. This page cannot diagnose a sudden or severe hair or scalp change.
What if I am unsure whether I need moisture, bond care or smoothing?
Use the Hair Quiz for a Celine Claire-only starting point, then review professional-use notices before choosing any advanced treatment.
Ready when you are

Match the treatment to the history of the hair.

Prevent the next styling stress. Maintain bond care between services. Keep professional chemistry in professional hands. The right starting point is the one that fits what happened to the hair and what the next routine needs to do.

Back to All Hair Concerns

Product Match

A customer favourite that fits this concern.

Moisture · Manageability

Argan Oil Hair Mask

Support for the feel and manageability of damaged-looking hair — a rinse-out moisture treatment, not a repair claim.